TEKNOS - AQUA PRIMER 2907-02 - 18 Litres - WHITE
Wood preservative for flow coating / dipping
AQUA PRIMER 2907-02 is an aqueous industrial wood preservative for new untreated wood designated for exterior use (use classes 2-3) as defined in EN 335-1 such as windows and doors. The product protects the wood surface and the treated area against wood destroying (EN 113) and wood discolouring fungi (EN 152) and performs to EN 599-1 requirements. Furthermore, the wood becomes more dimensional stable.
DIRECTIONS FOR USE
Surface preparation
The wood must be free from wood dust and contamination. The moisture content of the wood should be: Windows and doors: approx. 13% and should not exceed 15%. Cladding: should not exceed 18%.
Application
Handle product and dry freshly treated wood in areas with good ventilation. All industrial application processes must be carried out within a contained area situated on impermeable hard standing with bunding to prevent run-off and a recovery system in place (e.g. sump).
Application conditions
Stir thoroughly before use. Due to evaporation, the solid content of the liquid must be adjusted with water regularly. This adjustment is based on the measured solid of the liquid in the system. Optimum temperature for products and surroundings: +15°C - +30°C. Humidity levels below 80% RH.
Maintenance
The surface treatment must be maintained regularly.
Storage
The product must be stored at temperatures +5°C - +30°C. Shelf life in unopened containers: See “Best before date” on the label. Keep containers tightly closed after use. Store away from foodstuffs. Should not be exposed to direct sunlight. Do not use near domestic animals or livestock.
TECHNICAL DATA
| Solids | abt. 10 % by volume |
|---|---|
| Volatile organic compound (VOC) | abt. 30 g/l |
| Tinting system | Teknocolor |
| Clean up | Water. |
| Colours | Base T (translucent colours). |
| Packages | 20 l, 120 l, 1000 l. |
| Safety markings | See safety data sheet. |
| Approvals & certificates | The Biocidal Products Regulation (BPR, Regulation (EU) 528/2012),EN 599-1,EN 927-2,Vindues Industrien 2ØKO |
Before use, the manufacturer or technical service department should be consulted to confirm the product’s suitability for the specific substrate, coating system, and exposure conditions. Please see "Additional information" for approved countries and national registration numbers.
