TEKNOS - ANTISTAIN AQUA 5200-00
ANTISTAIN AQUA 5200-00, a water-borne industrial primer for new wood designated for exterior use such as windows and doors.
ANTISTAIN AQUA 5200-00 minimises yellowing from knots and softwood with a large amount of heartwood.
Before use, the manufacturer or technical service department should be consulted to confirm the product’s suitability for the specific substrate, coating system, and exposure conditions.
FOR OTHER TEKNOS INDUSTRIAL WOOD PRODUCTS - CLICK - >> HERE
DIRECTIONS FOR USE
Surface preparation
The wood must be free from wood dust and contamination. The moisture content of the wood should be approx. 13% and should not exceed 15%. Pretreatment is required for wood substrates not meeting Durability Class 3, EN 350:2016. Teknos has a range of preservative products meeting the requirements of EN 599-1, please see these within the range.
Application conditions
Stir thoroughly before use. Optimum temperature for products and surroundings: +15°C - +30°C. Optimum relative humidity of the air is 50-70%. Wet film range 125-200 µm.
Storage
Storage temperature is +5°C - +30°C. Shelf life in unopened containers: See “Best before date” on the label. Keep containers tightly closed after use.
TECHNICAL DATA
| Solids | abt. 32 % by volume |
|---|---|
| Volatile organic compound (VOC) | abt. 3 g/l |
| Tinting system | Teknocolor |
| Theoretical spreading rate | 5-8 m²/l |
| Clean up | Water. |
| Colours | White. |
| Packages | Available in a range of standard pack sizes. |
| Safety markings | See safety data sheet. |
| Approvals & certificates | EPD |
Before use, the manufacturer or technical service department should be consulted to confirm the product’s suitability for the specific substrate, coating system, and exposure conditions. Please see "Additional information" for approved countries and national registration numbers.
