TEKNOS Ferrex Combi (for interior & exterior metal)
WATERBORNE DIRECT-TO-METAL PAINT
FERREX® COMBI paint contains anticorrosive pigmentation to effectively prevent the formation of rust beneath the paint film.
As a one-component, waterborne paint FERREX COMBI is safer and easier to use than traditional anti-corrosive paints, and will withstand the harshest of conditions.
2-IN-1 NO SEPARATE PRIMER NEEDED
Most anticorrosive paints need a separate primer for protection and adhesion. With FERREX COMBI you get both primer and topcoat at the same time; no separate primer is needed.
FERREX COMBI has excellent adhesion and with proper preparation, it can be painted over lightly rusted or bare metal, as well as previously painted metal surfaces.
THE BEST RUST PROTECTION IN ALL CONDITIONS
FERREX COMBI protects against corrosion in the harshest conditions. From coastal areas with high humidity, extreme weather and salt impact to indoor spaces with regular condensation.
FROM A HINGE TO A BRIDGE
FERREX COMBI is so versatile, it can be used on metal roofs, walls, railings, furniture, doors, windows, radiators, support columns, ladders, trailers and much more.
It can be applied by a brush or a spray gun.
Coverage: 7 - 9 m²/l (one application by brush, approx. 50 µm dry film thickness).
Qualities
- Waterborne
- One-component
- Combination primer and topcoat
- No need for a separate primer - Direct to metal
- Corrosion class C4
- Tintable
- Amazing colour and gloss retention
- Great for maintenance painting
- Semi-matt finish
CORROSION CLASS C4 (HIGH)
Exterior suitability:
Industrial areas and coastal areas with moderate salinity
Interior suitability:
Chemical plants, swimming pools, coastal ship and boat yards
COLOURS: RAL, NCS, SSG, BS. Also most major brand colour equivalent matches, please type colour required.
APPLICATIONS: Stir thoroughly before use. On vertical surfaces, when a dry film thickness of over 100 µm is desired, we recommend spray application twice. When FERREX COMBI is left without a top coat and applied with a brush, we recommend at least two coats. If airless spraying, use a tip size diameter 0.015-0.019"
APPLICATION CONDITIONS: The surface to be treated must be dry. During the application and drying period (note also the temperature of the night following the application) the temperature of the ambient air, the surface and the product shall be above +10°C and the relative air humidity below 80%. If the temperature of the surface to be painted exceeds +40°C, the application properties and the adhesion of the paint may deteriorate. Additionally, the temperature of the surface to be treated and the product must be at least +3°C above the dew point of the ambient air.
Type: Water-based,
Gloss level: Semi-matt (9-13% reflective)
Thinner: Water
Application: Brush, Roller or Airless Spray
Sizes: 1 litre and 2.7 Litres
TEKNOS Ferrex Combi - Anti Rust Metal Paint
Touch Dry, 1 hour
Recoat time, 2.5 Hours


