Toupret Ready To Use Filler 4kg
 
Size: 4kg
Colour: White (when dry)
 
Overview:
Toupret Ready To Use Filler is a pre-mixed interior wall and ceiling filler that requires no preparation before use. Open the 4kg bucket and apply it straight to the surface. There is no mixing, no guesswork, and no wasted material.
The filler will not flash or grin once painted over, so there is no need to spot prime. It sands back easily to a smooth, even finish. Apply it with a blade, putty knife, or trowel to fill defects up to 1cm deep.
Once applied, the filler is ready to paint in as little as 12 hours. It carries an A+ indoor air quality (IAQ) rating and suits a wide range of interior substrates - from plasterboard and gypsum plaster to brick, cement, and primed wood.
 
Key Features and Benefits
Ready to use: No mixing required - apply straight from the 4kg bucket.
No spot priming needed: Will not flash or grin under any paint type.
Fills up to 1cm deep: Suitable for larger holes and defects in a single pass.
Quick drying: Ready to paint in 12-24 hours, depending on conditions.
Sands easily: Achieves a smooth finish without excessive effort.
A+ IAQ classification: Meets high indoor air quality standards.
No working time limit: Use at your own pace without the product drying in the tub.
Water-clean tools: Blades and trowels rinse off with water after use.
Overcoat with anything: Compatible with all paint types, fillers, and wall coatings.
Broad substrate compatibility: Works on plasterboard, cement, concrete, brick, breeze block, stone, and more.
White finish when dry: Blends into standard interior paint applications.
Adhesion tested: Meets EN 16-566 adhesion standard at over 0.5 MPa.
 
Typical Applications
Filling cracks and holes in interior walls and ceilings
Repairing plasterboard and gypsum plaster surfaces
Filling surface defects in cement and concrete walls
Patching old painted surfaces before redecorating
Repairing breeze blocks, brick, and cellular concrete
Filling holes and imperfections in primed wood and stone
General pre-decoration repairs on interior surfaces
 
How to Use
Prepare the surface: Make sure the surface is clean, dry, and free from dust or loose material.
Apply the filler: Use a blade, putty knife, or trowel to press the filler firmly into the defect.
Build up depth: Fill to a maximum depth of 1cm in a single application.
Allow to dry: Leave for 12-24 hours. Drying time varies with coat thickness and ambient conditions.
Sand back: Once fully dry, sand the filler to a smooth, flush finish.
Overcoat: Apply any paint, filler, or wall coating directly - no spot priming required.
 
Frequently Asked Questions (FAQs)
Does Toupret Ready To Use Filler need to be mixed before use?
No. It comes pre-mixed in the tub and is ready to apply straight away. No water or additional products are needed.
Can I use this filler on exterior surfaces?
No. This product is for interior use only. Do not apply it to external walls or surfaces exposed to weather.
How deep can I fill in one application?
You can fill up to 1cm deep in a single application. For deeper repairs, allow every coat to dry before applying the next.
How long does Toupret Ready To Use Filler take to dry before painting?
It is ready to paint in 12-24 hours. The exact time depends on the substrate, coat thickness, and the temperature and humidity of the room.
What temperature range is suitable for applying this filler?
Apply only at temperatures between +8°C and +35°C, and at a relative humidity below 70%.
 
Summary
Toupret Ready To Use Filler in the 4kg bucket is a straightforward, pre-mixed solution for interior wall and ceiling repairs. It fills defects up to 1cm deep, dries within 12-24 hours, and accepts any paint or coating without the need for spot priming. With a broad range of compatible substrates and an A+ IAQ rating, it suits most interior repair jobs before redecorating.